the different between one way hinge and two way hinge
Author：admin Time：2015/1/15 18:23:40
About hinge, there are many on the market, the main hydraulic hinge and the hydraulic hinge, hydraulic hinge is relatively easy to distinguish, close it, there is a buffer in the closed slowly shut down, in the process of closing smoothly without noise, in addition to this, there is also a good is not easy to squeeze.The hydraulic hinge although there is no hydraulic hinge worked so well, but from its market still occupied a considerable market share.For ordinary hinge, there is a force on the market at present hinge hinge and 2 force, how to distinguish?Starters, nature is easy to distinguish, but for ordinary users, think it’s not easy to distinguish.
A force in the hinge when closing is very simply, as long as you use with a small force, it will not hesitate to shut the door, it is simply the characteristics of powerful, frank.If you want to be frank, direct effect, then, a force in the hinge is the best choice for you.2 force hinge, characterized by closing a door plank in any Angle position can pause before 45 degrees, 45 degrees after the close on its own, its characteristic is 45 degrees before its not close on its own, as you swing its position, 45 degrees after closed immediately without hesitation., of course, there are some manufacturers produce turned off after 30 degrees, also have to 60 degrees after closing, but no matter how to design and production, the second section of the hinge is a node, the node before and after the effect of the different.
More than about a hinge hinge and two forces from its use in the process of the difference between the senses to difference, the difference method may not be too govevnment feeling, for people familiar with the hinge from the senses is very easy to distinguish, but for ordinary users, still not too much sensual concept, sensuous things need to experiment, after all, to feel.So, a hinge hinge and secondary forces there are no other distinction method?The answer is yes.Now that a force and 2 force, so the same affirmation is not possible, is bound to exist differences in the structure or its cannot implement different effect, so they the difference of structure is embodied in where?We say 2 first hinge, hinge 2 force can need not see spring, the spring main device in the position of the hinge arm toward the cup deep sag node。
In addition, the secondary force hinge in the process of switch, the friction between gasket and spring, so 2 force hinge in order to enhance the switch of the friction lubrication, can add a little oil in the middle of the gasket and spring wire to improve the lubrication effect of switch.
A second member of the hinge and forces the structure of the hinge are obviously different, although the hinge, spring is also a force in the hinge arm to the cup deep sag node location but spring hinge spring in the second member of the structure and force of structure is very different, a force on both ends of the spring is the spring structure left and right sides of each have a spring wire, the gasket side with a specifically for spring wire stay open, convenient for spring wire through.As shown.
Hinge is a force of the structure to ensure the effect that one section of the hinge force, close direct one pace reachs the designated position.